Find the right hub centric rings
Over 200 sizes · from 14,90 € / set
Enter measurements
📏 Measuring guidemm
mm
Enter measurements → results appear here
⚙️
Nissan Tiida — bolt pattern, center bore, ET and hub centric rings
Nissan Tiida. The European C11 generation from 2008–2011 uses a 4x114.3 pattern, 66.1 mm hub and M12x1.25 wheel nuts.
Center bore and bolt pattern by generation
| Generation | Center bore | Bolt pattern | ET | Torque | Hub centric ring |
|---|---|---|---|---|---|
| C11 (2008–2011) | 66.1 mm | 4x114.3 | ET40 | 113 Nm |
Find size 66.1 mm →
⚠️ European C11 hatchback and saloon; 1.5 dCi, 1.6 and 1.8 engine variants. |
💡 The center bore listed in the table refers to the hub size, which is always the inner diameter of the hub centric ring.
How to choose the right hub centric ring?
The hub centric ring inner diameter matches your car hub size (66.1 mm for Nissan Tiida). The outer diameter depends on your wheel — it is the wheel center bore diameter.
📏 Measuring guide · 🔍 All sizes · ⚙️ Order custom made →