Find the right hub centric rings
Over 200 sizes · from 14,90 € / set
Enter measurements
📏 Measuring guidemm
mm
Enter measurements → results appear here
⚙️
Suzuki SX4 — bolt pattern, center bore, ET and hub centric rings
First-generation European Suzuki SX4 EY hatchback and GY sedan (2006–2013). 60.1 mm hub bore and 5x114.3 bolt pattern; fasteners differ by body type.
Center bore and bolt pattern by generation
| Generation | Center bore | Bolt pattern | ET | Torque | Hub centric ring |
|---|---|---|---|---|---|
| EY (2006–2013) | 60.1 mm | 5x114.3 | ET40 | — |
Find size 60.1 mm →
⚠️ European SX4 EY hatchback. ET40 is a documented fitment of BBS 8Jx18 and Interwheels 7Jx17 replacement wheels, not a universal OE offset. Brock B33 specifies M12x1.5 wheel bolts for EY; GY sedan uses different fasteners. Check wheel-specific torque instructions. The later SX4 S-Cross JY is listed separately under S-Cross. |
| GY (2006–2013) | 60.1 mm | 5x114.3 | ET40 | — |
Find size 60.1 mm →
⚠️ European SX4 GY sedan. ET40 is a documented fitment of BBS 8Jx18 and Interwheels 7Jx17 replacement wheels, not a universal OE offset. Brock B33 specifies M12x1.25 wheel nuts for GY; EY hatchback uses different fasteners. Check wheel-specific torque instructions. The later SX4 S-Cross JY is listed separately under S-Cross. |
💡 The center bore listed in the table refers to the hub size, which is always the inner diameter of the hub centric ring.
How to choose the right hub centric ring?
The hub centric ring inner diameter matches your car hub size (60.1 mm for Suzuki SX4). The outer diameter depends on your wheel — it is the wheel center bore diameter.
📏 Measuring guide · 🔍 All sizes · ⚙️ Order custom made →