Find the right hub centric rings
Over 200 sizes · from 14,90 € / set
Enter measurements
📏 Measuring guidemm
mm
Enter measurements → results appear here
⚙️
Toyota Celica — bolt pattern, center bore, ET and hub centric rings
Toyota Celica. Hub bore 54.1 mm. 4x114.3 / 5x100.
Center bore and bolt pattern by generation
| Generation | Center bore | Bolt pattern | ET | Torque | Hub centric ring |
|---|---|---|---|---|---|
| RA/TA (1970–1977) | 54.1 mm | 4x114.3 | ET25 | — |
Find size 54.1 mm →
⚠️ 1st generation |
| RA/MA (1977–1981) | 54.1 mm | 4x114.3 | ET25 | — | Find size 54.1 mm → |
| RA/MA/SA (1981–1985) | 54.1 mm | 4x114.3 | ET25 | — | Find size 54.1 mm → |
| ST160 (1985–1989) | 54.1 mm | 5x100 | ET37–ET41 | — |
Find size 54.1 mm →
⚠️ GT-Four neliveto |
| ST180 (1989–1993) | 54.1 mm | 5x100 | ET43–ET47 | — |
Find size 54.1 mm →
⚠️ GT-Four ralliauto |
| ST200 (1993–1999) | 54.1 mm | 5x100 | ET45 | — |
Find size 54.1 mm →
⚠️ GT-Four |
| ZZT230 (1999–2006) | 54.1 mm | 5x100 | — | — |
Find size 54.1 mm →
⚠️ Last Celica |
💡 The center bore listed in the table refers to the hub size, which is always the inner diameter of the hub centric ring.
How to choose the right hub centric ring?
The hub centric ring inner diameter matches your car hub size (54.1 mm for Toyota Celica). The outer diameter depends on your wheel — it is the wheel center bore diameter.
📏 Measuring guide · 🔍 All sizes · ⚙️ Order custom made →