Find the right hub centric rings
Over 200 sizes · from 14,90 € / set
Enter measurements
📏 Measuring guidemm
mm
Enter measurements → results appear here
⚙️
Toyota MR2 — bolt pattern, center bore, ET and hub centric rings
Toyota MR2 mid-engine sports car. AW11/ZZW30 use 54.1 mm / 4x100, W20 uses 60.1 mm / 5x114.3.
Center bore and bolt pattern by generation
| Generation | Center bore | Bolt pattern | ET | Torque | Hub centric ring |
|---|---|---|---|---|---|
| AW11 (1984–1989) | 54.1 mm | 4x100 | ET37–ET41 | 103 Nm |
Find size 54.1 mm →
⚠️ Mid-engine! |
| SW20 (1989–1999) | 54.1 mm | 5x114.3 | ET38–ET45 | — |
Find size 54.1 mm →
⚠️ Turbo version popular |
| ZZW30 (1999–2007) | 54.1 mm | 4x100 | ET45 | 103 Nm |
Find size 54.1 mm →
⚠️ MR-S/MR2 Spyder |
💡 The center bore listed in the table refers to the hub size, which is always the inner diameter of the hub centric ring.
How to choose the right hub centric ring?
The hub centric ring inner diameter matches your car hub size (54.1 mm for Toyota MR2). The outer diameter depends on your wheel — it is the wheel center bore diameter.
📏 Measuring guide · 🔍 All sizes · ⚙️ Order custom made →