Find the right hub centric rings
Over 200 sizes · from 14,90 € / set
Enter measurements
📏 Measuring guidemm
mm
Enter measurements → results appear here
⚙️
XPeng G9 — bolt pattern, center bore, ET and hub centric rings
XPeng G9 electric car; 60.1 mm hub bore and 5x112 bolt pattern.
Center bore and bolt pattern by generation
| Generation | Center bore | Bolt pattern | ET | Torque | Hub centric ring |
|---|---|---|---|---|---|
| G9A (2023–2025) | 60.1 mm | 5x112 | ET30 | — |
Find size 60.1 mm →
⚠️ European G9A type e5*2018/858*00201*. ET30 is documented for approved 8.5Jx21 replacement wheels, not an exhaustive offset range. Wheel-specific 140/160 Nm values are not generalized as vehicle torque. |
| G9B (2025–) | 60.1 mm | 5x112 | ET30 | — |
Find size 60.1 mm →
⚠️ European G9B type e4*2018/858*00277*. ET30 is documented for approved 8.5Jx20 and 8.5Jx21 replacement wheels, not an exhaustive offset range. Wheel-specific 140/160 Nm values differ; no general vehicle torque is published. |
💡 The center bore listed in the table refers to the hub size, which is always the inner diameter of the hub centric ring.
How to choose the right hub centric ring?
The hub centric ring inner diameter matches your car hub size (60.1 mm for XPeng G9). The outer diameter depends on your wheel — it is the wheel center bore diameter.
📏 Measuring guide · 🔍 All sizes · ⚙️ Order custom made →