Find the right hub centric rings
Over 200 sizes · from 14,90 € / set
Enter measurements
📏 Measuring guidemm
mm
Enter measurements → results appear here
⚙️
Subaru Legacy — bolt pattern, center bore, ET and hub centric rings
Subaru Legacy generations I–V (1989–2014). All generations modelled here use a 56.1 mm hub, 5x100 pattern and M12x1.25 thread. Outback is listed separately.
Center bore and bolt pattern by generation
| Generation | Center bore | Bolt pattern | ET | Torque | Hub centric ring |
|---|---|---|---|---|---|
| I (BC/BF, 1989–1993) | 56.1 mm | 5x100 | ET55 | — |
Find size 56.1 mm →
⚠️ First-generation Subaru Legacy. |
| II (BD/BG, 1994–1998) | 56.1 mm | 5x100 | ET55 | — |
Find size 56.1 mm →
⚠️ Second-generation Subaru Legacy. |
| III (BE/BH, 1998–2003) | 56.1 mm | 5x100 | ET55 | — |
Find size 56.1 mm →
⚠️ Third-generation Subaru Legacy. |
| IV (BL/BP, 2003–2009) | 56.1 mm | 5x100 | ET55 | — |
Find size 56.1 mm →
⚠️ Fourth-generation Subaru Legacy. |
| V (BM/BR, 2009–2014) | 56.1 mm | 5x100 | ET55 | — |
Find size 56.1 mm →
⚠️ Fifth-generation Subaru Legacy. |
💡 The center bore listed in the table refers to the hub size, which is always the inner diameter of the hub centric ring.
How to choose the right hub centric ring?
The hub centric ring inner diameter matches your car hub size (56.1 mm for Subaru Legacy). The outer diameter depends on your wheel — it is the wheel center bore diameter.
📏 Measuring guide · 🔍 All sizes · ⚙️ Order custom made →